PFE 98 Copper Fibre Mask, elastic ears
Version with elastic around the ears
The PFE 98 copper fibre mask with a 98.1% PFE filtration level, an industry first for a reusable mask
- 98.1% PFE (Particle Filtration Efficiency) filtration rate. Test method for the filtration of 0.3 micron diameter NaCl particles.
- Made with copper fibre**
- Second layer of protection by high temperature lamination
- Washable and reusable
- Weaving area molding the nose
- Elastic around the ears
- Molds to the shape of your face (but is not hermetic)
- One size fits all
- Color grey/white
Wearing a non-medical mask helps protect others and protect yourself! EC3D masks should be viewed as a physical barrier, which blocks the saliva droplets (spit) that may be emitted by individuals who sneeze in the proximity of the mask wearer, as well as a method to block the respiratory droplets emitted by the individual wearing the mask. It also create a physical barrier hands-mouth (For those who touches their face!)
EC3D masks are reusable and washable.
Think about the environment and opt for a reusable and washable mask.
Tight weaving on top of the nose. Reduces fogging in glasses.
Better air circulation
Density weaving zone for better protection at the front of the face and to expel air on the sides.
Comfortable elastic bands, preventing ear injuries.
Think environment and opt for a washable and reusable mask
Filtration rate tested at 98.1%. (Particle Filtration Efficiency).
Made with copper fibre
Copper fibre fights bacteria and destroys them in about 4 hours.
MADE WITH COPPER FIBRE
**EC3D masks are made with a copper fibre, which can actively fight bacteria, eventually destroying them in approximately 4 hours (compared to a regular surface where bacteria may remain active for up to an estimated period between 24 hours and 4 days).
Wearing a mask should not, however, cause sagging in compliance with the prevention instructions; respect the physical distance of two meters, frequent hand washing and wear a face cover, mask when the distance of two meters cannot be respected.
How to use the EC3D mask:
- Wash your hands;
- Put the mask on your face making sure to cover your mouth and nose well and place the corde so that it stays in place and adheres well to your face;
- Once adjusted and in place, avoid touching the mask and your face;
- You must change your mask when it appears damp or humid and/or up to a maximum wearing time of 3 hours;
- To remove it : (1) wash your hands; (2) fold the mask back on itself (folded in two), and (3) remove the mask as far away from your face as possible. Once removed, put the mask immediately in the washing machine or in a plastic bag to isolate it;
- Once the mask is removed, wash your hands immediately.
A misused mask can become a breeding ground for germs and can cause more problems than it solves.
The EC3D mask must be used according to the following recommendations for use. EC3D MASKS ARE NOT SIMILAR TO N95 MASKS OR SURGICAL MASKS AND THEY DO NOT CARRY THE SEAL OF APPROVAL OF THE NIOSH (National Institute for Occupational Safety and Health). Wearing an EC3D mask does not guarantee that the virus, bacteria or other diseases will not spread.
Wash the mask on a regular cycle in the washing machine (hot water is strongly recommended). Hang out to dry. Wash the mask after each use.
EC3D masks are reusable. The lifespan of a mask is approximately 50 uses. If the number of uses surpasses the 50 recommended uses, the mask and its copper fibre will be less effective.
RESERVE AND LIMITATION OF LIABILITY
EC3D masks should be viewed as a physical barrier, which blocks the saliva droplets (spit) that may be emitted by individuals who sneeze in the proximity of the mask wearer, as well as a method to block the respiratory droplets emitted by the individual wearing the mask.
The customer acknowledges having read and accepted the present protocol for the wearing, handling and manufacturing of EC3D masks prior to purchasing.
THE CUSTOMER ALSO UNDERSTANDS AND AGREES THAT EC3D (QSD INC.) CANNOT BE HELD LIABLE FOR ANY INJURY OR DAMAGE, DIRECT OR INDIRECT, OF ANY KIND, IN CONNECTION WITH THE MASKS, THEIR USE OR THE MANNER IN WHICH THEY ARE WORN.
This protocol is governed by the laws of the Province of Quebec and the laws of Canada applicable therein.
If you have any questions regarding this protocol, we invite you to communicate with us using one of the following communication methods:
T : 1.866.528.4655
Content: 40% Polyamide, 35% Copper Infused fibers, 25% Elastane.
Second layer: lamination
For reasons of hygiene, no return or exchange will be accepted
Sold as 1 unit
EC3D / QSD Inc.
Laval (Quebec) Canada H7S 2G2
Machine wash on normal cycle
Do not tumble dry, hang to dry
Do not use fabric softener
Only oxygen / non-chlorine bleach allowed
Do not iron
Free shipping on orders over $49
United States UPS
Delivery: 2-7 Business days
Shipping cost: $9.99
Prepaid customs duties
United States UPS Expedited
Delivery: 2-3 Business days
Shipping cost: $19.99
Prepaid customs duties
Orders are shipped by UPS (depending on destination). Free shipping applicable in United States only.
FREE RETURNS - 30 DAY MONEY BACK GUARANTEE
Returns accepted within 30 days of the date of purchase, for any reason, for a full refund.
Satisfaction guaranteed or money back. Only our high standards of quality can allow us such a policy of satisfaction.
See all details & conditions on shipping and returns >